GPS Data Points

Steve Steinbrecher's Avatar

Steve Steinbrecher

27 Jul, 2020 08:53 PM

Good afternoon gentlemen. From our discussion of many operational periods ago, I finally got my people to save me a screen shot of what I waas referring to.

Please le me know what your brain trust figures out....:-))

Mucho Thanks!

Steve S.

  1. 1 Posted by Robin Baker on 31 Jul, 2020 03:36 PM

    Robin Baker's Avatar

    Refresh our memories, Steve - what was your question?

  2. 2 Posted by Steven Steinbre... on 31 Jul, 2020 07:14 PM

    Steven Steinbrecher's Avatar

    Hi Robin…..

    I had sent a message to Matt and Ben about the GPS points error/warning message from my tech guys during the early OP periods from this campaign search. We could not find the error message. Then last Saturday it popped up again, so I was re-sending the request with the “screen shots (see below) of the errmsg.

    We need to figure how to ask our people to configure their GPSS’s I think, so they don’t drop so many bread crumbs??

    I am NOT a tech guy; only the lowly team lead….:-)) I have cc’d two of my tech guys on this, so you can reply directly to them if you would like….

    Thank You so very much!!

    Steve S.

    Steven Steinbrecher
    MGT TL 2020
    [email blocked]

  3. 3 Posted by Robin Baker on 31 Jul, 2020 07:30 PM

    Robin Baker's Avatar

    Steve,

    It looks to me like the warning message may refer to the CalTopo/SARTopo Configuration Menu where you configure the number of Vertices in the Drawing section (see attached file - Configuration Menu.jpg). Placing the number too high may result in performance issues?

    Of course, Matt or Ben will be able to clarify. I could be wrong....

    Robin

  4. 4 Posted by Steven Steinbre... on 31 Jul, 2020 07:51 PM

    Steven Steinbrecher's Avatar

    Thank You, Robin…..

    Please ask them to do a “reply all” so my tech guys get the message straight on…

    Steve

    Steven Steinbrecher
    MGT TL 2020
    [email blocked]

  5. 5 Posted by Robin Baker on 31 Jul, 2020 07:55 PM

    Robin Baker's Avatar

    Steve,

    I'm not with CalTopo Support. I'm just an "intermediate-level" user
    participating in the discussion.

    Robin

  6. 6 Posted by Steven Steinbre... on 31 Jul, 2020 11:18 PM

    Steven Steinbrecher's Avatar

    Thank You, Robin….

    That may explain the problem (what you sent)….. I shared it with our tech guys….

    Steve

    Steven Steinbrecher
    MGT TL 2020
    [email blocked]

  7. Support Staff 7 Posted by Julie on 03 Aug, 2020 08:48 PM

    Julie's Avatar

    Steve,

    I think Robin is correct here. There doesn't appear to have been any problem with the track imports. Basically it warns you if you try to edit a track with a whole lot of points because the edit has to update the info for all those points and especially if you have a limited internet connection, this could take a while and lock the browser up. Or it could be fine.

    Best,
    Julie

  8. Julie closed this discussion on 03 Aug, 2020 08:48 PM.

  9. Steven Steinbrecher re-opened this discussion on 03 Aug, 2020 10:02 PM

  10. 8 Posted by Steven Steinbre... on 03 Aug, 2020 10:02 PM

    Steven Steinbrecher's Avatar

    Thank you very much Julie.

    Steve

  11. Julie closed this discussion on 03 Aug, 2020 10:24 PM.

Comments are currently closed for this discussion. You can start a new one.

Keyboard shortcuts

Generic

? Show this help
ESC Blurs the current field

Comment Form

r Focus the comment reply box
^ + ↩ Submit the comment

You can use Command ⌘ instead of Control ^ on Mac